• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

President Antenna's

It claims 7/8 wave? Whats the feedpoint like?
Solid brass.
Texas 1800 Power CB Amateur Radio Antenna 84 inches Roof Mount Permanent Kit With Coax And PL259 Best Antenna Canada Special Base Close-up-980x980.jpg
 
That’s what I’ve been thinking. Along with the McKinley I’ve been eyeing for my son.

PRESIDENT shows an impressive increase in the warranty when radio & antenna purchased together. Five years, unless I’m mistaken. (It was in company product announcements).

Thats almost enough time for Undertaker to let them age on the shelf.

Bottled in bond.

Duke Ellington’s, “In a Mellow Tone”.

Circuitry barely kissed by fine Honduran cigar smoke. Warming up the Johnny Hartman radio voice.

The NASA surplus electromechanical counter ticking off a half a decade.

And then, that moment

.
 
Last edited:
  • Like
Reactions: undertaker
I bought a 3/8-24 to S)-239 adapter from DX Engineering to adapt one mount to whatever antenna I use at the time. I installed one K-400 mount on the rear of my truck and use the SO-239 mount for my 2m/70cm was antenna and when I switch to 6m or HF I use the adapter with it as they are 3/8-24. Best of both worlds. Some day I might install a second antenna but for now it works fine. The adapter is REALLY heavy so no worries with even large HF antennas

Was it the COMET AD-35M?
 

Attachments

  • A25DD8E2-DBCA-426F-8817-32B094A51773.jpeg
    A25DD8E2-DBCA-426F-8817-32B094A51773.jpeg
    18.5 KB · Views: 7

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Greg T has left the room.
  • @ BJ radionut:
    EVAN/Crawdad :love: ...runna pile-up on 6m SSB(y) W4AXW in the air
    +1
  • @ Crawdad:
    One of the few times my tiny station gets heard on 6m!:D
  • @ Galanary:
    anyone out here familiar with the Icom IC-7300 mods