-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Walcott CB shop Davenport Iowa
- Thread starter rabbiporkchop
- Start date
So I guess that's your roundabout way of admitting it's impossible to tune a radio using a meter without actually coming out and admitting I was correct all along. It's nice to know you admit IMD actually exists and that it's not part of my fabricated reality.
Last edited:
Not impossible but that doesn't mean it's the proper way. I use a scope and think more people should. You are the one that beats around the bush when someone asks a question you aren't qualified to answer.
You're trying to make it look like I've been condoning hacking up radios and jacking off a watt meter all along. If you believe that you're delusional. Try to twist something else that I've said becuase you've failed again.
I have nothing to admit and have the same stance I always have. Your tech uses his test equipment as part of his sales pitch and some of the stuff he does with it is a gimmick. You are a tool, an insecure foolish little puppet.
Another fact is most of these new CPU controlled radios come out of the box tuned to spec and performing well. My guess is that's why Mark likes them so much....less work and more profit with Vaseline left to spare .
Something I've always recommended is leaving a Radio stock since those are the ones that I hear the furthest
I'm glad you recognize the importance of using a scope. I wish more people recognized that. Anytime someone says they plan on going to a tech that butchered one of my radios, I cringe at the thought of wasted money and someone incapable of hearing me or being heard at any distance worth mentioning. I'm quite secure in myself.
I don't consider myself a tool. I'm very happy with the performance of my equipment and I wish everyone had equipment that worked as well as mine because then the world would be a much better place if I didn't have to repeat myself because someone is incapable of hearing at a distance greater than a mile from their station.
Then why do you have Fine Tune work on your radios and give that tune-up you boast about? Surely you don't have problems that need work that often and if you do then you need a different tech to fix it right so it doesn't break down again.
The agc mod is kinda hard to beat. The difference between .4uv and .0399uv equates to an extra 20 miles between mobile stations without increasing output power of either station.
I have yet to see a good VHF or UHF radio with a GAsFET front end with 0.0399uV sensitivity let alone a CB. Not for any decent level of quieting.
I kind of figured as much hence your sarcasm. I've grown quite accustomed to it myself.
No sarcasm. Pure truth. I find it odd that you have stated you don't understand all the " technical mumbo jumbo" to use your own exact words yet you constantly quote sensitivity numbers and ranges based on power and even talk about the virtues if various mods etc. and like to display waveforms with your opinions about them. It just does not add up and I am certainly not the only one noticing it or commenting on or off board about it.
I understand enough to piss technicians off.
Signal gets weaker as it travels further.
Common sense dictates lower noise floor means ability to put more distance between stations and to hear weaker signals
and again i ask what is the sinad for this magic 0.0399uV signal? ..
that will tell the truth about all of this rather than you throwing a figure with no substance out there as it stands your claim has no substance.
i know a heap of eme guys that would love to see this magic mod ..yes that is sarcasm
that will tell the truth about all of this rather than you throwing a figure with no substance out there as it stands your claim has no substance.
i know a heap of eme guys that would love to see this magic mod ..yes that is sarcasm
- No one is chatting at the moment.