• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Wilson mag

When you put the antenna on the roof be sure the tightening lever is on the passenger side so if the antenna hits something it will fall back as the tightening lever will loosen.

Hey that’s good to know! I have it on the driver’s side for practical purpose. Haven’t really slammed it yet but you never know.
 
If it loosens and falls back and you transmit that’s not good.

So why should it not be on the driver side? Besides tightening. Maybe I am missing something.
Bent antenna. I would rather put it back up and tighten it than take it off and try to straighten it, that's all.
 
I have a Sirio 5000 on both my SUV's and I really like them better than my old Wilson 1k's for transmit and receive.

Don't count on the fold over saving your whip though. The whip on the Sirio is tapered and very thin at the top.I was fine all winter long, but whacked a tree limb at 60 this past week and it folded over sure enough. The last foot and half of whip still bent around like a curly Q. I will say I have bent Wilson whips as well, just not to that extreme. It was easy enough to straighten, but I'm sure it will be easier to bend now that it's been whacked once

I had been running it on the drivers side and may switch back now that summer is here. I know not the ideal placement, but bent antennas seem to be a recurring thing with me.

I don't find the Sirio any easier to remove than Wilson. You still have to unscrew it, but with the Sirio I don't have to keep up with a weather cap like I did for the Wilson.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Greg T has left the room.
  • @ BJ radionut:
    EVAN/Crawdad :love: ...runna pile-up on 6m SSB(y) W4AXW in the air
    +1
  • @ Crawdad:
    One of the few times my tiny station gets heard on 6m!:D
  • @ Galanary:
    anyone out here familiar with the Icom IC-7300 mods