Search results

Hello everyone I have a Gen Lee with 9ft rgx8 to amp (1x4) on back floor from there I have 9ft rgx8 to meter (on dash) then from there its wilson roof mount SWR was 1.9:1 untill I replaced the jumper from radio to amp with a new 12ft jumper. SWR went to almost 3 so I switched the old 9ft with...

thank you very much I been looking for an answer like that for a while seems not many know about fm. but know with what I know Im gonna give it a try thanks...

hello I gotta know every thing about theese cbs so I ask alot of ????? what about fm is it fun to mess with? are there any advantages? can I use my 1x4 fatboy on FM? can I leave my dosy in line? thanks in advance fellas for all the info.. and I forgot should swr stay the same? hope yall can...

Prishiate it I'll put that on the list just hate to pay to undo what I paid to have done but hey if that is as easy as adjusting my dead key maybe I can do it huh?

well I got two alts stock 70 amp and 120 amp gm 1 wire running into a red top and off the side posts is 4 gauge welding cable to back floorboard where 1x4 all 2879 fatboy is. On dash is GL (now 1.25w swing 50) 9 ft rgx8 to amp 9 ft back to dash meter dosy test center then from there on it is mag...

general lee 2w swing 50

well I went to a fat boy dealer and he put a H/M/L switch and worked in his shop fine L/250w M/350w H/450w Dead keys but in my suv same problem most of the time might work right 1 out of 50 times they said I should probably drill the hole and go ahead and roof mount my wilson 5000 what do you...

now my fatboy will either dead key 2 watts swing 1050w or dead key 1050w no in between it seems like I can never get this just right so my ? is how do I go about getting a variable power? or can I bypass it so I dont have to worry about this again?

I always wandered why they sold it as an 1100watt amp and I was only getting 725 out of it. SO like many of you suggested I upgraded my 8 gauge wire for my 1x4 fatboy to 4 gauge welding cable and wow 200w swing 1000 to 1100/fresh now I'm happy happy just the wire fellas and it went from 100...

I have a 1x4 fatboy and run 8 gauge power wire even though all you guys told me I shouldnt but that's all I had. thats what the place that sold me the amp sent me to install, so $ was tight figured I could make it work 4 a while and I must say you were all right. Tonight I was on the key...

I got a 70 amp and a 120 amp alt running into one red top (I know I probably shouldnt). I run a 1x4 now and want to run the 120 amp to a seperate battery set up maybe upgrade the 120 to like 200amp but I want ONE KICK A## battery that I can use to run a 2x8 or my 1x4 to a 16 pill MY ? is What...

finally found 4 guage wire by the foot $2.00. If I upgrade the power wire do I Have to upgrade the ground?

ok easy fix I found 4 guage for $2.00/ft STUPID question If I upgrade the power wire do I have to upgrade the ground?

OK thanks fellas I think I'll go to an alt shop cant be the wire though. although it is only 8 gauge I was checking volts at the battery. appreciate the replies...

now I see why I am Not seeing the watts that I fell I should. When I key my voltage goes from 14.45v to 10.5 to 11v does anyone have any Ideas on how to keep my voltage up when I key? I got two alts and a red top optima only seeing 700 to 750 out of 1x4 all 2879 fat boy. need cheap ideas like...

my gen lee was 2w swing 50 which was running my 1x4 fat boy at 110w swing 750 now for some reason my dk is 1.25w same swing and is running my amp at 35w swing 750 any ideas on what might have happend and is the low dk a good thing if all the modulation still sounds good (it does) is somthing...