-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
"prototype" 10 Meter Amplifier
- Thread starter Mudfoot
- Start date
have to look better when on compt instead of phone,looks good and beter specs than most but will stick with glass fl2100 or bigger
I see no input tuning/output tuning, and the board should be turned 180 degrees to shorten the length of the coax jumpers from the board itself to the SO-239's. Those leads should be as short as possible.
While it does look like a quality build, there are some improvements to be made.
IMO, the old Messenger amps, and the old Palomar/Magnum series amps set the standard for how a production "10 meter" amp should be built.
~Cheers~
While it does look like a quality build, there are some improvements to be made.
IMO, the old Messenger amps, and the old Palomar/Magnum series amps set the standard for how a production "10 meter" amp should be built.
~Cheers~
they where good,and clean ts also.alot still around today,just sold one to a friend awhile back and uses it everyday on 10mtrs
350 watt power input MAX, yet 480 watt PEP SSB OUTPUT. Hmmmmm????
He may have found a way to break the laws of physics.
He may have found a way to break the laws of physics.
Where did you get that from?? The specs shown in the Ebay sale show 350 watts DC input and 120 watts AM/FM out or 250 watts pep at 1 dB compression.
- No one is chatting at the moment.
-
-
-
@ AWP:Is it possible to be on a lake and have a homing directional beam being emitted from the shore so a person could navigate to that beam's source? For example at night to a jetty.
-
-
@ BJ radionut:
June VHF
The American Radio Relay League (ARRL) is the national association for amateur radio, connecting hams around the U.S. with news, information and resources.www.arrl.org