You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
When I put in the settings Rig :none everything works but no possible to set fake it
when i try to use in the settings rig: yaesu 1200dx possible to set "fake it" but nothing works
can i use that rig and what about the settings
thank you for advice on3bm
Do you really need to use split? If you're just doing casual FT8, you don't need split. If you're contesting, then you probably need it. I don't have that rig, so I can't comment on the right setting for it.
Yes, you must use split (or fake it) to don't transmit on filter edges.
@on3bm set "fake it" in software. Than set red cursor on 3000 and press TUNE.
You should see freq on display changing on TX.
Please advise me to what is a good replacement mic for my SR-497HPC... Answer: 497 is "wired like Cobra", so many choices available. That radio does not need a power mic, so purchase a stock "coffin style" mic with a decent cord, like the ones that Astatic uses. The Superstar DM-507 is my go-to. https://www.ebay.com/itm/3050474478...adANq91JSiEEnz8EGqPJRBloTgEyaVsBoCtoMQAvD_BwE $12.99 + .99 cent shipping.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.