Search results

Robalo is getting ready to go Whirlwide on the Suppa Bowel :ROFLMAO:

Local about 65 to 75 miles of my location,non-dx with a vertical @ 45 ft on regular 40 ch am/ssb

Contact Nomad he sells an adapter board from 5 pin to 4 pin connector that will work on your radio

You can stop by at http://amfone.net too

Plenum cable is coated with a fire-retardant coating (usually Teflon) so that in case of a fire it does not give off toxic gasses and smoke as it burns. Twisted-pair and coaxial versions of cable are made in plenum versions

Wait till you hear your kitchen toaster vibrating :eek:

The white RG-6 is not uv rated,the black one seems to hold better and normally is uv rated

Well,I made the recommendation base on my personal experience at work for residential & commercial applications to cover big homes or offices in areas where the indoors cell reception is flakey and I have used both brands for Verizon,ATT and T-mobile and other carriers Also have experience in...

That s why I recommend SureCall Good company,great customer support and great products

Yes and they going to recommend to get a Winegard Hotspot. https://winegard.com/products/cellular/4g-lte-hotspots SureCall and Wilson=(More expensive) works pretty good as long as you know how to point the external yagi antenna to the cell tower for your service provider and use the...

Check this https://www.surecall.com/

You spend to much time on 26.585 AM hearing so many Bleeepps :ROFLMAO:

Hi Handy Andy Thank you for your input in my quest Yes I have extra varactors too (y) SVC251 and BB809 axial type,lucky me I got then over 10 years ago Happy Four of July 73 de Andy

Wow you make my day NZ8N Big Thank You for your great help Sir (y) I bought over 25 boards in the last 6 or 7 years from Ing Maurer http://funkservice.at/en_pll-modul.htm For PLL 03A,MB8719,CC1301.UPD858,UPD861,TC91019.TC9106,LC7131 and UPD28xx and for others that I don´t remember 40 Low...

Hi: I need some help in the VCO area to stretch the range about 100 Khz up or down I have 3 of these little SSB Radios 2 TRC-465´s and 1 453 I installed a board to get Hi Band and Low Band and works but the VCO is shy of 100khz or the last 10 channels of the Hi Band or short 10 channels in...

Thank you for your reply Sir Regards Andy

you can get the schematics http://www.cbtricks.com/radios/robyn/t_240d/graphics/robyn_t_240d_om_sch.pdf

Oh well somebody must know the answer unless Goldfinger or the gang there do it :whistle:

It is the cybernet type board clone for the 148 GTL DX ? Like this : http://www.cobraworxshopz.com/cobra_148_clone_43.html ?

PLL alignment for 208AA or 208AD = Uniden Grant XL & Grant LT with 11.3258 crystal 5. Adjust L59 by similar connection of (4) to obtain within 34.9865MHz +/-20Hz as will be indicated by frequency counter, then set Mode switch back to "AM". 6. Change moode switch to "AM" and adjust L23 to...