I'm not too concerned about water. I have a pretty good amount stored, and it rains a lot here. So even if the public water supply were interrupted or contaminated (both of which have happened here in the past), I would still have water. I have several water filters, and you can disinfect water with bleach:
- Disinfect water using household bleach, if you can’t boil water. Only use regular, unscented chlorine bleach products that are suitable for disinfection and sanitization as indicated on the label. The label may say that the active ingredient contains 6 or 8.25% of sodium hypochlorite. Do not use scented, color safe, or bleaches with added cleaners.If water is cloudy, let it settle and filter it through a clean cloth, paper towel, or coffee filter.
- Locate a clean dropper from your medicine cabinet or emergency supply kit.
- Locate a fresh liquid chlorine bleach or liquid chlorine bleach that is stored at room temperatures for less than one year.
- Use the table below as a guide to decide the amount of bleach you should add to the water, for example, 8 drops of 6% bleach, or 6 drops of 8.25% bleach, to each gallon of water. Double the amount of bleach if the water is cloudy, colored, or very cold.
- Stir and let stand for 30 minutes. The water should have a slight chlorine odor. If it doesn’t, repeat the dosage and let stand for another 15 minutes before use.
- If the chlorine taste is too strong, pour the water from one clean container to another and let it stand for a few hours before use.
Volume of Water Amount of 6% Bleach to Add* Amount of 8.25% Bleach to Add*
1 quart/liter 2 drops 2 drops
1 gallon 8 drops 6 drops
2 gallons 16 drops (1/4 tsp) 12 drops (1/8 teaspoon)
4 gallons 1/3 teaspoon 1/4 teaspoon
8 gallons 2/3 teaspoon 1/2 teaspoon
*Bleach may contain 6 or 8.25% sodium hypochlorite.
Source:
https://www.epa.gov/ground-water-and-drinking-water/emergency-disinfection-drinking-water