You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Click here to find out how to win free radios from Retevis!
And now I will agree right back as I use my Hitachi 100mhz for tracking modulated waveforms as it is in line all the time but I do like the Rigol for trouble-shooting stages at the component level
Well if the counter is accurate Yes and if you are talking about the alignment of Offset osc. it should be pretty accurate. That being said I use a Rigol and I had to do some alignment mods myself to have it display accurate results. I use my Rigol a lot and don't have any real complaints.
It's not a scam but it is a pain in the Arse. What eBay has done is made it better for them they get their money right away and eBay pays PayPal percentage if you noticed your percentage went from 10% to 12.75% and then you are required to ship right away and then 3 to 5 days later you will get...
I will try to be a little help: We need to know the physical dimensions of the control
shaft length & diameter in mm. millimeters inches will work but mm is better
you already said it is a 20k
There is a possibility Kens Electronics would have something that would work remember even if the...
Well since these old radios used the same audio amp for modulation and for transmitting audio I would check to microphone first it may be a cord or connector or cable issue with the microphone. Full quitting you sound like a ham talking about FM coms.
I PMed you, let me know what the timeline is for a 16 Mhz version
I have a #5 I just restored looks nearly like new if anyone could use one works on Cobra 138 or 139 and I think Simba and of course others the same vintage and chassis.
You may have voltage where are checking for it unfortunately you don't have it for the display. I assume you have no recieve and no transmit just a green light which is fed by the mains DC. There is a regulator for the supply to the display I think it's located at the front of the board if I...
I use a rig runner on my bench many of the radios l work on have those connectors on them already besides I made many different adapters for different situations works out good for me. Should be good to use in the Truck. The 121 and the Hooker together will not exceed 15 amps so you are fine there.
Been selling on eBay since about 1997 and although I have had some negative experiences with a few customers I never have had anyone try to rob parts and then want their money back but I have had my items ended by eBay because someone reported my post and to this day I have no understanding of...
Too much to talk about here and I have little time but wanted to post this so Todd could get a look-see I still have a few things to touch upon this restore but for the most part, it is FINISHED!!!
There was not much about these that were correct although they were complete they had many...
Nightmare on elm street citizens band radio edition. Nomad that is very noble attempt we will see how this transpires it will depend on Baconaters resolve and desire to keep on keeping on. I will keep tuned in.
We completed a number of mods and alterations on this also fixed some issues but we won't talk about those. This is just for Todd so he can see where we are at with this job we should be done with this before too long.
They use the same control in a lot of their 40 channel mobile units that come from the same time I just replaced one I found in a realistic 40 channel mobile and they have that dual pot/switch in them you might check for 1 of those usually their cheap.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.