While looking for information about any deals at Dayton 2010, I came across an interesting video clip of the first U.S. Wouxun dealer selling the Wouxun KG-UVD1P ham radios. A quick search of google turned up the website were I was able to contact the dealer and get a price quote, and in no time I had a brand new 2m/440 HT to play with at a very reasonable price.
Physical Characteristics
I'll first describe the physical characteristics before discussing the functionality of the radio. Here is a close-up picture of what the Wouxun HT looks like:
You can see that the button layout is very typical of most HTs in this basic, no-frills class. Most of the buttons are self explanatory, with the exception being the "TDR" button, which turns dual band on and off.
One of the first things most people will notice is that the antenna connector is not the typical SMA connector that we usually see on the mainstream HT's. The connector on these radios is the reverse SMA normally found on network router antennas:
You can get adapters for BNC or regular SMA if you wish to use a different antenna.
For size reference, here is the Wouxun (right) next to an Icom IC-T70A (left):
As you can tell, the Wouxun is a little smaller than the Icom. As a result, it also feels a little lighter in the hand.
The right side of the radio is where the headphone and speaker jacks are located. These are the exact same configuration as the Kenwood HT's, so any Kenwood speaker/mic headsets should work fine...mine did.
There are LEDs on top of the radio that serve a couple of different useful functions. The two LEDs to the right are for bands A and B. They turn green when receiving and red when transmitting:
Receiving:
Transmitting:
The larger LED to the left serves only one function: a flashlight.
The radio comes with a belt clip, wrist strap, 1300mAh Lithium Ion battery, and a nice desk charger. I hope that the inclusion of desk chargers by the Chinese companies and Alinco drives Yaesu, Icom, and Kenwood to do the same.
Here is a picture of the radio in my hand to give you good perspective on it's size. You can also see that the display is simple, but effective.
At the time of purchase, pricing on the radio and accessories from Wouxun.us is as follows:
KG-UVD1P 136-174 & 350-470 - $107
USB Cable & Software - $18
1700 mAh Battery - $24
AA Battery Pack - $8
12v Battery Eliminator - $12
Leather Case - $10
SMA - BNC Adapter - $5
Dual Slot Charger - $24
The only accessory I purchased was the USB cable & Software. Next up in this review, I'll discuss the radio's functionality and try to provide some assistance on the manual.
Physical Characteristics
I'll first describe the physical characteristics before discussing the functionality of the radio. Here is a close-up picture of what the Wouxun HT looks like:
You can see that the button layout is very typical of most HTs in this basic, no-frills class. Most of the buttons are self explanatory, with the exception being the "TDR" button, which turns dual band on and off.
One of the first things most people will notice is that the antenna connector is not the typical SMA connector that we usually see on the mainstream HT's. The connector on these radios is the reverse SMA normally found on network router antennas:
You can get adapters for BNC or regular SMA if you wish to use a different antenna.
For size reference, here is the Wouxun (right) next to an Icom IC-T70A (left):
As you can tell, the Wouxun is a little smaller than the Icom. As a result, it also feels a little lighter in the hand.
The right side of the radio is where the headphone and speaker jacks are located. These are the exact same configuration as the Kenwood HT's, so any Kenwood speaker/mic headsets should work fine...mine did.
There are LEDs on top of the radio that serve a couple of different useful functions. The two LEDs to the right are for bands A and B. They turn green when receiving and red when transmitting:
Receiving:
Transmitting:
The larger LED to the left serves only one function: a flashlight.
The radio comes with a belt clip, wrist strap, 1300mAh Lithium Ion battery, and a nice desk charger. I hope that the inclusion of desk chargers by the Chinese companies and Alinco drives Yaesu, Icom, and Kenwood to do the same.
Here is a picture of the radio in my hand to give you good perspective on it's size. You can also see that the display is simple, but effective.
At the time of purchase, pricing on the radio and accessories from Wouxun.us is as follows:
KG-UVD1P 136-174 & 350-470 - $107
USB Cable & Software - $18
1700 mAh Battery - $24
AA Battery Pack - $8
12v Battery Eliminator - $12
Leather Case - $10
SMA - BNC Adapter - $5
Dual Slot Charger - $24
The only accessory I purchased was the USB cable & Software. Next up in this review, I'll discuss the radio's functionality and try to provide some assistance on the manual.