• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

11 meter is very quiet?

Heard 226 Texas calling CQ . I answered and he came back. But the channel was too jammed up for us to hold a good conversation. I said I'd stand by until things quieted down. As if by magic a couple of minutes later it was quiet and we hooked up again. I asked him where he was and he said San Angelo. Then I knew it was WDX226 , Brother DXer. Had a nice long QSO until the skip started dying out. Nice to connect with you again Rod. It's been a long time. Sounding good as always. 73 my friend.

- J.J.399
 
Great QSO, 316! Conditions were truly ugly up here with all 4 directions coming through. You got a good sounding rig!!
i sure do appreciate that Mr Greg. crt6900v, untouched right out of the box. beats spending $100 on alignment on everything else i tried. always keeping the tx @ 15w, lmr240, pt99 with an unbeatable s6 noise floor, pin 4 removed from an astatic 636L mic. all the same back at you
 
i sure do appreciate that Mr Greg. crt6900v, untouched right out of the box. beats spending $100 on alignment on everything else i tried. always keeping the tx @ 15w, lmr240, pt99 with an unbeatable s6 noise floor, pin 4 removed from an astatic 636L mic. all the same back at you
I normally have a steady 4 to 5 S units of noise here. Makes it rough to pull people out from that.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Mark Malcomb:
    Hello BJ. Been a long time since I've been on. You doing well? Mark Malcomb
  • @ Naysayer:
    I’m
  • @ kingmudduck:
    Hello to all I have a cobra 138xlr, Looking for the number display for it. try a 4233 and it did not work