• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

11 meter is very quiet?

Am skip has been out of this world here today. It's been interesting listening to the cb war between the sand Jawa other operators in Texas. Not classy conversations by any means but interesting that they've all stayed at it all day today.

An occasional recording saying "if it don't splatter, it don't matter".

Classy stuff.
 
nice to make contact with you Mr 945. 316 ohio barefoot. came in here over s6 floor like you were a mile down the road. take care out there
Great QSO, 316! Conditions were truly ugly up here with all 4 directions coming through. You got a good sounding rig!!
 
Heard 226 Texas calling CQ . I answered and he came back. But the channel was too jammed up for us to hold a good conversation. I said I'd stand by until things quieted down. As if by magic a couple of minutes later it was quiet and we hooked up again. I asked him where he was and he said San Angelo. Then I knew it was WDX226 , Brother DXer. Had a nice long QSO until the skip started dying out. Nice to connect with you again Rod. It's been a long time. Sounding good as always. 73 my friend.

- J.J.399
 
Great QSO, 316! Conditions were truly ugly up here with all 4 directions coming through. You got a good sounding rig!!
i sure do appreciate that Mr Greg. crt6900v, untouched right out of the box. beats spending $100 on alignment on everything else i tried. always keeping the tx @ 15w, lmr240, pt99 with an unbeatable s6 noise floor, pin 4 removed from an astatic 636L mic. all the same back at you
 
i sure do appreciate that Mr Greg. crt6900v, untouched right out of the box. beats spending $100 on alignment on everything else i tried. always keeping the tx @ 15w, lmr240, pt99 with an unbeatable s6 noise floor, pin 4 removed from an astatic 636L mic. all the same back at you
I normally have a steady 4 to 5 S units of noise here. Makes it rough to pull people out from that.
 
Had a nice long QSO until the skip started dying out. Nice to connect with you again Rod. It's been a long time. Sounding good as always. 73 my friend.

- J.J.399
Well, this was unexpected. Thanks for the qso JJ. Your were sounding choice on the Cobra, my friend. And two days in a row at that!

73's
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    GlocknSpiel has left the room.
  • @ kingmudduck:
    So I have a cobra 138xlr and the meter dose not work... It dose not key up and signal dose not work.... It is not stuck it the meter moves freely. now wires are resoldered on both ends...So now that do I look at. Could it be a diode or a transistor?
  • dxBot:
    Greg T has joined the room.
  • dxBot:
    Greg T has left the room.